|
||||
Broadband Triplexer Combiner | TPR-713730-xxx | |||
|
Overview
The CCI Broadband Triplexer combines three bands, PCS/AWS (1695-2200), WCS/BRS (2300-2700) and 3.5 (3300-5925) onto a common port. Specifically intended for use in multi-band systems with limited feeder lines, this CCI Triplexer facilitates the addition of new technologies including LTE and new spectrum to existing sites while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and the total cost to upgrade a site is significantly reduced. Technical Description: The Triplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the PCS/AWS, WCS/BRS, and 3.5 bands on a common feeder line. The fully weatherproof triplexer is available in both the rack mounted and outdoor pole mount models. The fully weatherproof outdoor tower mount outdoor Triplexer provides DC and AISG signal pass-through on the AWS/PCS or WCS/BRS ports to the Common port, enabling power and control for TMA's & RET antennas. The Smart Bias-Tee architecture passes the DC and AISG carrier frequency from any one of the input ports to the common port while blocking the DC and AISG signals from being re-injected into the other input ports.The triplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit. |
The unit has been designed to minimize insertion loss while maximizing isolation. Particular attention has been given to the intermodulation performance of the Triplexer to minimize any passive intermodulation products from occurring. This unit is a 1U high 19" rack mount and is rated for IP67 so it can be deployed both indoors and out. A wall/pole mount bracket is also shipped with the unit to provide flexible mounting options. The triplexer is also available in optional outdour single, twin and quad configurations. Both the rack mount and pole mount configurations are available with 4.3-10 conectors and are IP67 rated for outdoor use. |
Electrical Specification
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | Common | 1695 - 2200 | 18 dB min., 20 dB Typ. |
2300 - 2700 | 18 dB min., 20 dB Typ. | ||
3300 - 5925 | 18 dB min., 20 dB Typ. | ||
PCS/AWS | 1695 - 2200 | 18 dB min., 20 dB Typ. | |
WCS/BRS | 2300 - 2700 | 18 dB min., 20 dB Typ. | |
3.5 | 3300 - 5925 | 18 dB min., 20 dB Typ. | |
Insertion Loss | COM to PCS/AWS | 1695 - 2200 | 0.2 dB typ., 0.35 dB max. |
COM to WCS/BRS | 2300 - 2700 | 0.3 dB typ., 0.45 dB max. | |
COM to 3.5 | 3300 - 5925 | 0.2 dB typ., 0.30 dB max. | |
Isolation | COM to PCS/AWS | 2300 - 2700 | 50 dB minimum |
3300 - 5925 | 50 dB minimum | ||
COM to WCS/BRS | 1695 - 2200 | 50 dB minimum | |
3300 - 5925 | 50 dB minimum | ||
COM to 3.5 | 1695 - 2200 | 50 dB minimum | |
2300 - 2700 | 50 dB minimum |
General Characteristics | |||
Impedance | 50 ohms | ||
Continuous Average Power | 200 W per input port maximum | ||
Peak Envelope Power | 1 kW max. (All Ports) | ||
Intermodulation Performance | <-117 dBm (-160 dBc) typical (2 × +43 dBm tones) all bands (Indoor & Outdoor) | ||
DC Pass Current/AISG Pass (AWS/PCS or WCS/BRS to Common port) | 3A/AISG signal (2.176 MHz) per AISG 2.0 |
Mechanical Specification
Indoor Rack Mount | |||
Connectors | 4 × 7-16 DIN female or 4 × 4.3-10 female | ||
Body Dimensions (Rackmount) | 1.73 × 9.80 × 6.65 in. (44.0 × 249.0 × 169.0 mm) | ||
Overall Dimensions (Rackmount - connectors not included) | 1.73 × 19.00 × 6.81 in. (44.0 × 483.0 × 173.0 mm) | ||
Weight | 8.4 lbs (3.8 kg) | ||
Mounting | 19 inch (483 mm) x 1U (266 mm) rack or included wall mount bracket | ||
Outdoor | Single | Twin | Quad |
Body Dimensions (Outdoor Pole Mount) | 1.69 × 9.80 × 6.65 in. (43 × 249 × 169 mm) |
3.70 × 9.80 × 6.65 in. (94 × 249 × 169 mm) |
7.01 × 9.80 × 6.65 in. (178 × 249 × 169 mm) |
Overall Dimensions (Outdoor Pole Mount) | 2.32 × 9.80 × 10.28 in. (59 × 249 × 261 mm) |
4.06 × 9.80 × 10.28 in. (103 × 249 × 261 mm) |
7.20 × 9.80 × 10.28 in. (183 × 249 × 261 mm) |
Weight | 8.0 lbs (3.6 kg) | 14.6 lbs (6.65 kg) | 27.8 lbs (12.6 kg) |
Mounting | Pole/Wall mounting bracket |
Rackmount Broadband Triplexer (TPR-713730-xxx) Outline Drawing | ||
Broadband Triplexer (TPO-713730-xxx) Outline Drawing |
Parts & Accessories
TPR-713730-0-S2 | 19 inch Rackmount Broadband Triplexer with 4.3-10 connectors, includes optional wall mount bracket and no DC/AISG pass through |
TPO-713730-x-S2 | Outdoor Broadband Triplexer with 4.3-10 connectors |
TPO-713730-x-T2 | Outdoor Twin Broadband Triplexer with 4.3-10 connectors |
TPO-713730-x-Q2 | Outdoor Quad Broadband Triplexer with 4.3-10 connectors |
Option (-x) | Description |
-S | Smart Bias-T, DC/AISG Pass through on either AWS/PCS port or WCS/BRS port |
-0 | No DC/AISG Pass through |
-1 | DC/AISG Pass through AWS/PCS Band to COMMON, DC Block on all other input ports |
-2 | DC/AISG Pass through WCS/BRS to COMMON, DC Block on all other input ports |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP20, IP67, IP68 |
|