|
||||
Broadband Outdoor Diplexer | DPO-7826B-xxx | |||
|
Overview
The CCI Outdoor Broadband Diplexer passes 700, 850 and 900 bands covering 698-960 MHz on its low band input port and AWS, PCS, WCS and BRS bands covering 1695-2690 MHz on its high band input port. The Diplexer combines the low band and high band signals on to a common port and is specifically intended for use in multi-band systems with limited feeder lines. The Diplexer facilitates the addition of new technologies including LTE and new spectrum to existing sites while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and significantly reduces the total cost to upgrade a site. Technical Description: The CCI Outdoor Broadband Diplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the 700/850/900 with the AWS/PCS/WCS/BRS bands on to a common feeder line. The fully weatherproof tower mount outdoor Diplexer provides DC and AISG signal pass-through on either of the band specific ports, enabling power and control for TMA's & RET antennas. The Smart Bias-T architecture passes the DC and AISG carrier frequency from any one of the input ports to the common port while blocking the DC and AISG signals from being re-injected into the other input ports. The Diplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit. |
Electrical Specification
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | COMMON | 698-960 | 20 dB minimum |
1695-2690 | 20 dB minimum | ||
Lowband Port 700/850/900 |
698-960 | 20 dB minimum | |
Highband Port AWS/PCS/WCS/BRS |
1695-2690 | 20 dB minimum | |
Insertion Loss | COMMON to Lowband Port |
698-960 | 0.15 dB typical, 0.2 dB maximum |
COMMON to Highband Port |
1695-2690 | 0.15 dB typical, 0.2 dB maximum | |
Isolation | Highband Port to Lowband Port |
1695-2690 | 50 dB minimum |
Lowband Port to Highband Port |
698-960 | 50 dB minimum |
General Characteristics | |
Impedance | 50 ohms |
Continuous Average Power | 200 W maximum all ports |
Peak Envelope Power | 2 kW maximum all ports |
Intermodulation Performance | <-110 dBm (-153 dBc) minimum, all bands at 2× +43 dBm tones |
Mechanical
Model | Single | Twin |
Connectors | 3 × 7-16 DIN female or 3 × 4.3-10 female |
6 × 7-16 DIN female or 6 × 4.3-10 female |
Dimensions w/Bracket (HxWxD) | 8.87 × 4.57 × 3.29 in. (225.2 ×116.0 × 83.5 mm) |
8.87 × 4.57 × 5.85 in. (225.2 × 116.0 × 148.5 mm) |
Housing Dimensions (HxWxD) | 5.87 × 4.57 × 2.165 in. (149.2 ×116.0 × 55.0 mm) |
5.87 × 4.57 × 4.72 in. (149.2 × 116.0 × 120 mm) |
Weight | 2.65 lbs (1.2 Kg) | 5.3 lbs (2.4 kg) |
Frontal Wind Load @ 150 km/hour | 13.2 Lbs. (58.8 N) | 13.2 Lbs. (58.8 N) |
Lateral Wind Load @ 150 km/hour | 4.9 Lbs. (21.7 N) | 10.1 Lbs. (44.9 N) |
Mounting | Pole (3 - 4.65 in) and Wall mounting bracket |
Outdoor Single Diplexer Outline Drawing | |
Outdoor Twin Diplexer Outline Drawing |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
RET-CBK | AISG Cable Kit |
BT-0821-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0821-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0821-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Product Information
DPO-7826B-S-S2 Dimension Drawing | ||
DPO-7826B-S-T1 Dimension Drawing |
Parts & Accessories
DPO-7826B-x-S1 | Outdoor Diplexer with 7-16 DIN connectors |
DPO-7826B-x-S2 | Outdoor Diplexer with 4.3-10 connectors |
DPO-7826B-x-T1 | Outdoor Twin Diplexer with 7/16 DIN connectors |
DPO-7826B-x-T2 | Outdoor Twin Diplexer with 4.3-10 connectors |
Option (-x) | Description |
-D | Smart DC for DC/ASIG pass through in either direction on any port |
-1 | DC/AISG Pass through Low Band to COMMON, DC Block on High Band port |
-2 | DC/AISG Pass through High Band to COMMON, DC Block on Low Band port |
-S | Smart Bias-T, DC/AISG Pass through on either port |
-0 | No DC/AISG Pass through and No DC Block |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68 |
|