|
||||
Broadband Quadplexer Combiner | QPO-18223456-xxx | |||
|
Overview
The CCI Broadband Quadplexer combines the Tx/Rx signals 1800, IMT 2100, 2300-2400 MHz and 2500-2700 MHz band inputs onto a common port. Specifically intended for use in multiband systems with limited feeder lines, this CCI Quadplexer facilitates the addition of new technologies including LTE and new spectrum to existing sites. The Quadplexer provides a minimum of 50 dB of isolation between each of the individual frequency ranges. By reducing the number of feeder lines, the cost to upgrade a site (tower loading, leasing and installation costs) is reduced. The CCI Quadplexer Combiner provides full band performance for each band with low insertion loss, low Intermodulation, and high power handling. Excellent return loss delivers the best match to the antennas and base station, saving precious transmit power. The Quadplexer is fully outdoor rated and can be pole or wall mounted with an optional outdoor configuration. Technical Description: The Outdoor Broadband Quadplexer Combiner consists of multiple filters to combine (or divide) full band 1800, IMT 2100, 2300-2400 MHz 2500-2700 MHz signals. This tower mount unit can be used as either a splitter or combiner to aggregate multiple bands on a common feeder line. All RF ports are terminated in 4.3-10 connectors. The fully weatherproof unit can be optionally configured with wall/pole brackets or 7-16 DIN connectors. The filters have been designed to minimize insertion loss while maximizing isolation. Particular attention has been given to the intermodulation performance of the Broadband Quadplexer to minimize any passive intermodulation products from occurring. The Quadplexer is IP68 rated and suitable for use outdoors. CCI filter and combiner products are designed and produced to ISO 9001 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities. |
Electrical Specification
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | Common | 1710 - 1880 | 20 dB minimum |
1920 - 2180 | 20 dB minimum | ||
2300 - 2400 | 20 dB minimum | ||
2500 - 2700 | 20 dB minimum | ||
1800 | 1710 - 1880 | 20 dB minimum | |
IMT 2100 | 1920 - 2180 | 20 dB minimum | |
2300-2400 | 2300 - 2400 | 20 dB minimum | |
2500-2700 | 2300 - 2700 | 20 dB minimum | |
Insertion Loss | COM to 1800 | 1710 - 1880 | 0.5 dB maximum |
COM to IMT 2100 | 1920 - 2180 | 0.5 dB maximum | |
COM to 2300-2400 | 2300 - 2400 | 0.5 dB maximum | |
COM to 2500-2700 | 2500 - 2700 | 0.5 dB maximum | |
Isolation | COM to 1800 | 1920 - 2180 | 50 dB minimum |
2300 - 2400 | 50 dB minimum | ||
2500 - 2700 | 50 dB minimum | ||
COM to IMT 2100 | 1710 - 1880 | 50 dB minimum | |
2300 - 2400 | 50 dB minimum | ||
2500 - 2700 | 50 dB minimum | ||
COM to 2300-2400 | 1710 - 1880 | 50 dB minimum | |
1920 - 2180 | 50 dB minimum | ||
2500 - 2700 | 50 dB minimum | ||
COM to 2500-2700 | 1710 - 1880 | 50 dB minimum | |
1920 - 2180 | 50 dB minimum | ||
2300 - 2400 | 50 dB minimum |
General Characteristics | |
Impedance | 50 ohms |
Continuous Average Power | 200 W maximum |
Peak Envelope Power | 2 kW maximum |
Intermodulation Performance(all ports) | <-117 dBm (-160 dBc) typical (2 × +43 dBm tones) all bands |
DC Pass Current/AISG Pass | 3A/AISG signal (2,.176 MHz( per AISG 2.0 |
Mechanical Specification
Model | Single | Twin |
Connectors | 5 x 4.3-10 female or 5 x 7-16 female | 5 x 4.3-10 female or 5 x 7-16 female |
Dimensions w/o Bracket | 7.95 × 6.57 × 2.05 in. (202.0 × 167.0 × 52.0 mm) | 7.95 × 6.57 × 2.05 in. (202.0 × 167.0 × 52.0 mm) |
Dimensions w/bracket | 7.95 × 12.3 × 2.64 in. (202.0 × 256.0 × 67.0 mm) | 7.95 × 12.3 × 4.76 in. (202.0 × 256.0 × 121.0 mm) |
Weight | 6.6 lbs (3.0 kg) | 13.2 lbs (6.0 kg) |
Mounting | Pole or wall mount |
Broadband Quadplexer (QPO-18223456-S-S2) Outline Drawing |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
RET-CBK | AISG Cable Kit |
BT-0723-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0723-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0723-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Product Information
QPX-07081921 Broadband Quadraplexer outline drawing |
Parts & Accessories
QPO-18223456-S-S1 | Single Broadband Quadplexer with 7-16 connectors and Smart Bias-T for DC/AISG Pass -through |
QPO-18223456-S-S2 | Single Broadband Quadplexer with 4.3-10 connectors and Smart Bias-T for DC/AISG Pass -through |
QPO-18223456-S-T1 | Twin Broadband Quadplexer with 7-16 connectors and Smart Bias-T for DC/AISG Pass -through |
QPO-18223456-S-T2 | Twin Broadband Quadplexer with 4.3-10 connectors and Smart Bias-T for DC/AISG Pass -through |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68 |
|