|
||||
20W SDAR Directional Coupler/Detector | DCD-2332-0S3 | |||
![]() |
|
|
|
In the Americas | |
Sales | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
Customer Service | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
Technical Support | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
|
||||
20W SDAR Directional Coupler/Detector | DCD-2332-0S3 | |||
![]() |
|
CCI’s 20W SDAR Directional Coupler/Detector is used in the SDAR Terrestrial 20W Repeater System. Technical Description: The Coupler/Detector is connected to the output of the IM Repeater Diplexer Filter Network. The coupler provides a serial interface capable of reading both the forward and reflected output power on a continuous basis. |
RF Parameters | Ports | Specification |
Frequency Range | Input, Output | 2319.5 MHz Minimum, 2345.5 MHz Maximum |
Insertion Loss | Input - Output | 0.3 dB Maximum |
VSWR (Return Loss) | Input, Output | 1.2:1 Maximum (20.8 dB Minimum) |
Sample Port | 1.5:1 Maximum (14.0 dB Minimum) | |
Continuous Average Power | Input, Output | 100W (+50 dBm) |
Peak Envelope Power | Input, Output | 400W (+56 dBm) |
Power Reading Accuracy | ±0.3 dB | |
Power Reading Range | +20 dBm min., +50 dBm max. | |
Power Monitor Coupling | Sample Port | 40 dB |
General Characteristics | |
Impedance | 50 ohms |
Operating Voltage | 10 VDC minimum, 15 VDC maximum |
DC Current Consumption | 200 mA maximum |
Communication Interface | Serial RS422 |
Baud Rate | 38.4 K |
Message Syntax | Per SX03-92005-P09-02 |
Model | DCD-2332-0S3 |
Output Connector | 1 × N (female) |
Input Connector | 1 × N (female) |
Sample Port Connector | 1 x SMA (female) |
Serial Port | 1 x D-Sub9-Female |
Dimensions (Body & Connectors) - (HxWxD) | 6.20 x 2.66 x 1.63 in. (157.4 x 67.5 x 41.5 mm) |
Weight | 1.75 Lbs (0.8 kg) |
Pin Number | Description |
1 | GND |
2 | +V |
3 | N/C |
4 | RX- |
5 | TX+ |
6 | N/C |
7 | N/C |
8 | RX+ |
9 | TX- |
DCD-2332-0S3 20W SDAR Directional Coupler/Detector Connector Pinout |
![]() |
|
DCD-2332-0S3 20W SDAR Coupler/Detector Outline Drawing |
|
![]() | FREQUENCY BAND | |
![]() | 698-798 MHz (700 Band) |
![]() | 790-862 MHz (LTE 800) |
![]() | 806-869 MHz (SMR 800) |
![]() | 816-869 MHz (SMR 800ABC) |
![]() | 824-894 MHz (Cellular) |
![]() | 880-960 MHz (GSM 900) |
![]() | 1427-1518 MHz (IMT 1400) |
![]() | 1710-1880 MHz (DCS) |
![]() | 1695-1780/2110-2180 MHz (AWS) |
![]() | 1850-1995 MHz (PCS) |
![]() | 1920-2170 MHz (IMT 2100) |
![]() | 2305-2360 MHz (WCS) |
![]() | 2300-2400 MHz (TDD) |
![]() | 2496-2690 MHz (BRS) |
![]() | 2570-2620 MHz (TDD) |