CCI Portal Login

CCI Customer Portal

In the Americas
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
89 Leuning Street  
South Hackensack, NJ 07606  
Customer Service  
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
89 Leuning Street  
South Hackensack, NJ 07606  
Technical Support  
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
89 Leuning Street  
South Hackensack, NJ 07606  
      Outdoor Diplexer DIP-2123E-O-AISG
  • Combines the frequencies covering AWS-PCS (1695-2155 MHz) with WCS-BRS (2300-2690 MHz)
  • High power 200 W per port with low insertion loss in a small, lightweight enclosure
  • Low intermodulation with isolation of >50 dB port to port
  • Smart Bias-T enables DC and AISG 2.0 pass-through on either input port
  • High reliability of >100K Hours MTBF and multi-strike lightning protection
  • Available outdoor pole or wall mounting options




The CCI Outdoor Diplexer passes the AWS and PCS bands covering 1695-2155 MHz on its low band input port and the full WCS and BRS bands which covers 2300-2690 MHz on its high band input port. The Diplexer combines the low band and high band signals on to a common port and is specifically intended for use in multi-band systems with limited feeder lines. The Diplexer facilitates the addition of new technologies including LTE to existing sites while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and significantly reduces the total cost to upgrade a site.
The CCI Outdoor Diplexer provides full band performance for each band with low insertion loss, low Intermodulation, and high 200 W per port power handling. Excellent return loss performance delivers the best match to the antennas and base station, saving precious transmit power. The CCI Diplexer enables full Remote Electrical Tilt (RET) and Tower Mount Amplifiers (TMA) control capability by providing DC and AISG 2.0 compliant pass-through on either input port using the Smart Bias-T.


Technical Description:

The CCI Outdoor Diplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the AWS-PCS with the WCS-BRS bands on to a common feeder line. The fully weatherproof tower mount outdoor diplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit.
The unit has been designed to minimize insertion loss while maximizing isolation. Particular attention has been given to the intermodulation performance of the diplexer to minimize any passive intermodulation products from occurring. The diplexer can be pole or wall mounted and the unit body is rated for IP67. All RF ports are DIN 7-16 connectors which are IP68 rated. The mounting kit is included with the unit as an accessory. An optional AISG output port is available for connection to other ALD’s (Antenna Line Devices).
CCI filter and combiner products are designed and produced to ISO 9001 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities.


RF Parameters Ports Frequency(MHz) Specification
Return Loss COMMON 1695-2155 18 dB min., 20 dB typ.
2300-2690 18 dB min., 20 dB typ.
AWS/PCS 1695-2155 18 dB min., 20 dB typ.
WCS/BRS 2300-2690 18 dB min., 20 dB typ.
Insertion Loss COMMON to AWS/PCS 1695-2155 0.2 dB typ., 0.35 dB max.
COMMON to WCS/BRS 2300-2690 0.2 dB typ., 0.35 dB max.
Rejection COMMON to AWS/PCS 2300-2690 50 dB min.
COMMON to WCS/BRS 1695-2155 50 dB min.
General Characteristics  
Impedance 50 ohms
Continuous Average Power 200 W max. (input ports), 500 W max. (Common port)
Peak Envelope Power 1 kW max. (input ports), 3 kW max. (Common port)
Intermodulation Performance <-110 dBm (-153 dBc) at 2 × +43 dBm tones all bands
DC Pass Current/AISG Pass 3A/AISG signal (2.176 Mhz) per AISG 2.0 on either input port


Operating Temperature -40˚C to +65˚C
Enclosure  Enclosure IP67, Connectors IP68
MTBF >100,000 hours
Lightning Protection 8/20us, ±20KA max, 10 strikes per IEC61000-4-5


Connectors 3 × 7-16 DIN female long neck
Dimensions (body only)(H×W×D) 5.28 × 7.77 × 2.09 in. (134.1 × 186.4 × 53 mm)
Dimensions (w/ brackets and connectors)(H×W×D) 8.87 × 7.77 × 2.72 in. (225.3 × 186.4 × 69 mm)
Weight with brackets 5.5 lbs (2.5 kg)
Mounting Pole/Wall mounting bracket


  DIP2123EOAISG Outline
  Outdoor Diplexer Outline Drawing

Block Diagram

  Outdoor Diplexer Block Diagram


SCU-AISG2-3 AISG 2.0 Site Controller
BT-0821-DMDF-AG-O DIN-Male RF Port, DIN-Female RF+DC+AISG Port
BT-0821-DFDM-AG-O DIN-Female RF Port, DIN-Male RF+DC+AISG Port
BT-0821-DFDF-AG-O DIN-Female RF Port, DIN-Female RF+DC+AISG Port

Parts & Accessories

DIP-2123E-O-AISG Outdoor Diplexer with bracket
DIP-2123E-O-AISG-AP Outdoor Diplexer with optional AISG output port and bracket

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68


Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001
ISO9001Logo RoHS logo 3GPPLogo


89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax