|
||||
Broadband Outdoor Diplexer | DPO-3730-xxx | |||
|
Overview
The CCI Outdoor Broadband Diplexer passes 380-2690 MHz on its low band input port and 3300-5925 MHz on its high band input port. The Diplexer combines the low band and high band signals on to a common port and is specifically intended for use in multi-band systems with limited feeder lines. The Diplexer facilitates the addition of new technologies including LTE and new spectrum to existing sites while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and significantly reduces the total cost to upgrade a site. Technical Description: The CCI Outdoor Broadband Diplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the 380-2690 MHz band with the 3300-5925 MHz band on to a common feeder line. The fully weatherproof tower mount outdoor Diplexer is available with DC and AISG signal pass-through on the low band port, enabling power and control for TMA's & RET antennas from this low band port, or with no DC/AISG pass-through on either port. |
Electrical Specification
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | COMMON | 380-2690 | 18 dB minimum, 20 dB typical |
3300-5925 | 18 dB minimum, 20 dB typical | ||
Lowband Port | 380-2690 | 18 dB minimum, 20 dB typical | |
Highband Port | 3300-5925 | 18 dB minimum, 20 dB typical | |
Insertion Loss | COMMON to Lowband Port |
380-2690 | 0.1 dB typical, 0.2 dB maximum |
COMMON to Highband Port |
3300-5925 | 0.1 dB typical, 0.15 dB maximum | |
Isolation | Highband Port to Lowband Port |
3300-5925 | 50 dB minimum |
Lowband Port to Highband Port |
380-2690 | 50 dB minimum |
General Characteristics | |
Impedance | 50 ohms |
Continuous Average Power | 200 W maximum all ports |
Peak Envelope Power | 2 kW maximum all ports |
Intermodulation Performance | <-117 dBm (-160 dBc) minimum, all bands at 2× +43 dBm tones (380 - 2690 only) |
Mechanical
Model | DPO-3730-x-S2 (Single) | DPO-3730-x-T2 (Twin) | DPO-3730-x-Q2 (Quad) |
Connectors | 3 × 4.3-10 female | 6 × 4.3-10 female | 12 × 4.3-10 female |
Dimensions w/Bracket (HxWxD) | 6.26 x 8.15 x 2.44 in. (159.0 x 207.0 x 62.0 mm) |
6.26 x 8.15 x 3.86 in. (159.0 x 207.0 x 98.0 mm) |
6.26 x 8.15 x 6.69 in. (159.0 x 207.0 x 170.0 mm) |
Housing Dimensions (HxWxD) | 2.44 x 8.15 x 1.97 in. (62.0 x 207.0 x 50.0 mm) |
2.44 x 8.15 x 3.39 in. (62.0 x 207.0 x 98.0 mm) |
2.44 x 8.15 x 6.22 in. (62.0 x 207.0 x 170.0 mm) |
Weight | 2.8 lbs (1.258 Kg) | 4.6 lbs. (2.09 kg) | 8.25 lbs. (3.752 kg) |
Frontal Wind Load @ 150 km/hour | 16.4 Lbs. (72.8 N) | 16.4 Lbs. (72.8 N) | 16.4 Lbs. (72.8 N) |
Lateral Wind Load @ 150 km/hour | 2.2 Lbs. (9.7 N) | 3.8 Lbs. (16.8 N) | 6.8 Lbs. (30.5 N) |
Mounting | Pole (3 - 4.65 in) and Wall mounting bracket |
Outdoor Broadband Single Diplexer Outline Drawing | |
Outdoor Broadband Twin Diplexer Outline Drawing | |
Outdoor Broadband Quad Diplexer Outline Drawing |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
RET-CBK | AISG Cable Kit |
BT-0821-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0821-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0821-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Parts & Accessories
DPO-3730-x-S2 | Outdoor Broadband Diplexer with 4.3-10 connectors |
DPO-3730-x-T2 | Outdoor Twin Broadband Diplexer with 4.3-10 connectors |
DPO-3730-x-Q2 | Outdoor Quad Broadband Diplexer with 4.3-10 connectors |
Option (-x) | Description |
-0 | No DC/AISG Pass through |
-1 | DC/AISG Pass through Low Band to COMMON, DC Block on all other input ports |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68 |
|