|
||||
Ultra-Broadband High Power Low PIM Load | LDO-60-200-gx | |||
![]() |
|
Overview
CCI’s high power low PIM load covers a broad frequency range from 600 to 6000 MHz, while delivering high power performance of up to 200 Watts. This load has excellent return loss performance. The unit is ideal for optimizing RF power distribution, which is often required for distributed antenna systems (DAS). The extremely wide frequency range allows use with multiband and broadband antennas as well as leaky cable systems. The high power handling makes this load well-suited for use with wireless base stations. The load has been designed and constructed with minimal solder joints which assures the correct dissipative loss and enhances the overall reliability. The attenuator can be configured with Male or Female, DIN 7-16, 4.3-10 or N-type connectors. CCI filter and combiner products are designed and produced to ISO 9001 certification standards for reliability and quality at our state-of-the-art engineering and manufacturing facilities. |
Electrical Specification
RF Parameter | |
Frequency Range | 600 - 6000 MHz |
Return Loss | ≥ 19 dB @ 600 - 3800 MHz |
Return Loss | ≥ 17 dB @ 3800 - 6000 MHz |
General Characteristics | |
Continuous Average Power | 200 W |
Impedance | 50 ohms |
Intermodulation Performance | N-type, <-155 dBc min; (2 × +43 dBm tones) |
Intermodulation Performance | 4.3-10, <-160 dBc min; (2 × +43 dBm tones) |
Intermodulation Performance | 7-16, <-160 dBc min; (2 × +43 dBm tones) |
Mechanical Specification
Model | LDO-60-100-Fx or LDO-60-100-Mx |
Connectors | 7-16 or 4.3-10 or N-type × 1 (Male or Female) |
Body Dimensions | 198 x 220 x 82 mm (7.8 x 8.7 x 3.2 in.) |
Dimensions w/Bracket & Connector | 198 x 319 x 104 mm (7.8 x 12.6 x 4.1 in.) |
Weight | 5.5 Kg (12.1 lbs) |
![]() |
||
Ultra-broadband High Power Load with Female 7-16 Connector Outline Drawing bracket not shown |
![]() |
||
High Power Low PIM Load Block Diagram |
Parts & Accessories
LDO-60-200-M1 | Ultra-broadband High Power, Low PIM 200 Watt Load with 7-16 Male Connector |
LDO-60-200-F1 | Ultra-broadband High Power, Low PIM 200 Watt Load with 7-16 Female Connector |
LDO-60-200-M2 | Ultra-broadband High Power, Low PIM 200 Watt Load with 4.3-10 Male Connector |
LDO-60-200-F2 | Ultra-broadband High Power, Low PIM 200 Watt Load with 4.3-10 Female Connector |
LDO-60-200-M3 | Ultra-broadband High Power, Low PIM 200 Watt Load with N-type Male Connector |
LD0-60-200-F3 | Ultra-broadband High Power, Low PIM 200 Watt Load with N-type Female Connector |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529 IP20 |
|