|
||||
Quad Port AISG Cable Kit | QPA-CBK2-AG-RRU | |||
|
|
|
|
|
In the Americas | |
Sales | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
Customer Service | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
Technical Support | |
+1 (201) 342-3338 phone | |
+1 (201)-342-3339 fax | |
89 Leuning Street | |
South Hackensack, NJ 07606 | |
USA | |
|
||||
Quad Port AISG Cable Kit | QPA-CBK2-AG-RRU | |||
|
|
|
CCI’s quad port antenna to remote radio unit (RRU) AISG Cable Kits provides all the required cables for the successful deployment of CCI’s quad port antennas and any CCI antennas with two Remote Electrical Tilt (RET) actuators. All of the control cables included in the kit are AISG 1.1 and AISG 2.0 compliant. AISG control of the quad port's two RET actuators can be configured in several ways. Depending on your requirements, a single RRU can be designated as the AISG controller whereby it controls both pairs of ports for the antenna. This AISG cable kit provides the necessary cables to enable this configuration with a longer RRU Jumper. The single RRU jumper is sixteen foot (5m) AISG cable that provides the connection from the RRU to the antenna, while the shorter RET jumper is an 18 to 20 inch AISG cable for daisy chaining between the RET actuators. |
Individual Cable Part Number | AISGC-M-F-18 | AISGC-M-F-16FT |
Cables per kit | 1 | 1 |
Connectors | 2 x 8 pin IEC 60130-9 Straight male/straight female |
2 x 8 pin IEC 60130-9 Straight male/straight female |
Tightening torque | Hand tighten only ≈ 1.84 ft-lbs (2.5 N·m) | Hand tighten only ≈ 1.84 ft-lbs (2.5 N·m) |
Construction | Shielded (Tinned Copper Braid) | Shielded (Tinned Copper Braid) |
Braid coverage | 85% | 85% |
Jacket Material | Matte Polyurethane (Black) | Matte Polyurethane (Black) |
Conductors | 1 twisted pair - 24 AWG 3 conductors - 19 AWG AWM style 2464 |
1 twisted pair - 24 AWG 3 conductors - 19 AWG AWM style 2464 |
Cable Diameter | 0.307 in (7.8 mm) | 0.307 in (7.8 mm) |
Length | 18 - 20 in (457 - 508 mm) | 196 in (5 m) |
Weight | 0.27 lbs (0.12 kg) | 0.69 lbs (.31 kg) |
Minimum bend radius | 3.9 in (100 mm) | 3.9 in (100 mm) |
AISG-Male to AISG-Female Jumper Cable |
|