CCI’s Receiver Air Interface Tray (RX-AIT) provides a convenient multiport connection for multiple basestations.

CCI’s Cellular 200W MCPA module supports multiple formats such as GSM, EDGE, CDMA, CDMA 1X, EV-DO and UMTS. The MPCA combines multiple radios on high radio count sites to reduce the required number of feeders without impacting coverage.

CCI’s SDAR Medium Power Amplifier (35W) is an RF-only SXM terrestrial repeater. It operates by receiving a signal from an existing SXM terrestrial repeater (DRU) in the intended coverage area, typically on a rooftop or tower, then filtering, amplifying and transmitting it to provide a much higher level signal at ground level for SXM users.

CCI’s Receiver Air Interface Tray (RX-AIT) provides a convenient multiport connection for multiple basestations.

CCI’s Receiver Air Interface Tray (RX-AIT) provides a convenient multiport connection for multiple basestations.

CCI’s AISG 2.0 Site Control Unit (SCU) is part of our suite of antenna products. This controller will enable operation of any AISG 2.0 device such as TMA’s or Remote Electrical Tilt (RET) controlled antennas.

CCI’s Portable AISG 2.0 Site Control Unit (SCU) is part of our suite of antenna products. This portable controller will enable operation of an AISG 1.1 or AISG 2.0 compliant device such as TMA’s or antennas with RETs.

CCI’s SDAR ECHO Dual Band Repeater is an RF-only SXM terrestrial repeater. It operates by receiving a signal from an existing SXM terrestrial repeater (DRU) in the intended coverage area, typically on a rooftop or tower, then filtering, amplifying and transmitting it to provide a much higher level signal at ground level for SXM users.

Communication Components, Inc. Single Tower-Top Masthead Amplifier (TMA) provides a TMA with SMR channel filtering and AISG control in a single housing.

CCI’s Triple Band Twin TMA (AWS/PCS/WCS), which includes AWS-3 and 700/850 bypass contains two triple band TMA’s in a single housing. The TMA’s are fully duplexed and share a single LNA for all three bands. The bypass path provides excellent isolation to the TMA path. Separate antenna ports for the bypass path and TMA path are combined onto a single BTS port.

CCI’s Dual Band (Cellular/PCS) TMA contains two TMA’s (i.e. one TMA for each band) in a dual housing.

CCI’s Dual Band (AWS/PCS) TMA contains one PCS and one AWS Low Noise Amplifier (LNA) which are fully duplexed to a single BTS input port and a single Antenna output port.

CCI’s Quad Band with “Dual Band (AWS/PCS) Active & 700/850 Bypass TMA contains one PCS and one AWS Low Noise Amplifier (LNA) which are fully duplexed and the 700 Band and Cellular Band being bypassed to a single BTS input port and a single Antenna output port.

CCI’s AWS/PCS Dual Band TMA with bypass is available in a single or twin configuration. Each TMA has a AWS/PCS Low Noise Amplifiers (LNA) which is fully duplexed to a single BTS input port with an antenna port for AWS/PCS.

CCI’s AWS/PCS Dual Band TMA with bypass is available in a single or twin configuration. Each TMA has a PCS/AWS Low Noise Amplifiers (LNA) which is fully duplexed to a single BTS input port with separate antenna ports for AWS/PCS and 600/700/850 bypass.