CCI’s Fiber Distribution Unit provides the means to coinvert RF input signal from the SXM Dual Band Exciter (DBE) into optical outputs that are used to distribute the SXM transmission to multipler Remote Fiber Units (RFU's). The FDU also provides bi-directional digital fiber connections to the individual RFU's to provide remote monitoring and control and reporting of real time signal quality metrics. Up to four optical fiber outputs are provided to distribute the SXM signal to multiple Remote Fiber Units.

CCI’s Remote Fiber Unit contains a Fiber to RF converter and pre-amplification and power amplification stages to elevate the SXM output to the desired level. An Automatic Leveling Control (ALC) loop adjusts the gain of the RFU to ensure a SXM High Band or Low Band output level no less than 17dB below the maximum composite WCS signal.

MTI Radio Installation Lever Tool

ZILLNK Radio Installation Lever Tool

 Three way handle for Zillnk Radio

Nokia Radio Installation lever tool for radios equipment with RM-06 and RM-07 hardware.

This two part antenna mounting bracket is designed to support up to 3 CCI Multiport Panel Antennas clamped to a single mounting pole.

Communication Components, Inc. Single Tower-Top Masthead Amplifier (TMA) provides a TMA with SMR channel filtering and AISG control in a single housing.

CCI’s Triple Band Twin TMA (AWS/PCS/WCS), which includes AWS-3 and 700/850 bypass contains two triple band TMA’s in a single housing. The TMA’s are fully duplexed and share a single LNA for all three bands. The bypass path provides excellent isolation to the TMA path. Separate antenna ports for the bypass path and TMA path are combined onto a single BTS port.

CCI’s Dual Band (Cellular/PCS) TMA contains two TMA’s (i.e. one TMA for each band) in a dual housing.

CCI’s Dual Band (AWS/PCS) TMA contains one PCS and one AWS Low Noise Amplifier (LNA) which are fully duplexed to a single BTS input port and a single Antenna output port.

CCI’s Quad Band with “Dual Band (AWS/PCS) Active & 700/850 Bypass TMA contains one PCS and one AWS Low Noise Amplifier (LNA) which are fully duplexed and the 700 Band and Cellular Band being bypassed to a single BTS input port and a single Antenna output port.

• High power 30W low PIM termination load supports a wideband from DC to 4200 MHz
• Excellent return loss performance
• Available with Male 4.3-10 or 7-16 Connectors

• High power 5W low PIM termination load supports a wideband from 380 to 3800 MHz
• Excellent return loss performance
• Available with Male 4.3-10 or 7-16 Connectors

Three RET Antenna with large RET spacing to RRU AISG Cable Kit.

Three RET Antenna with large RET spacing to RRU Right Angle AISG Cable Kit.

Eight foot (2.4 m), DualBand, twelve port antenna with a 33° azimuth beamwidth covering 698-896 MHz and 1695-2400 MHz frequencies.

Eight foot (2.4 m), DualBand, twelve port antenna with a 33° azimuth beamwidth covering 698-896 MHz and 1695-2180 MHz frequencies.

Eight foot (2.4 m), TriBand, twelve port antenna with a 33° azimuth beamwidth covering 698-960 MHz and 1695-2690 MHz frequencies.

Eight foot (2.4 m), TriBand, twelve port antenna with a 33° azimuth beamwidth covering 614-960 MHz and 1695-2690 MHz frequencies.