|
||||
Broadband Quadplexer Combiner | QPO-69197236-xxx | |||
|
Overview
Communication Components, Inc. Outdoor Broadband Quadplexer Combiner combines 555-960 MHz, PCS, AWS and WCS/BRS band Basestation Tx/Rx signals onto a common port. Specifically intended for use in quad band systems with limited feeder lines, the CCI Quadplexer model QPX-69197236 facilitates the addition of new technologies including LTE and new spectrum including AWS-3 to existing sites while providing a high degree of isolation between systems. By reducing the number of feeder lines, the cost to upgrade a site (tower loading, leasing and installation costs) is reduced. The CCI Outdoor Broadband Quadplexer Combiner provides full band performance for each band with low insertion loss, low Intermodulation, and high power handling. Excellent return loss delivers the best match to the antennas and base station, saving precious transmit power. DC and AISG pass-through retains full RET and TMA capability utilizing CCI’s AISG suite of products. Technical Description: The Outdoor Broadband Quadplexer Combiner consists of multiple filters to combine (or divide) full band 555-960 MHz, PCS, AWS and WCS/BRS signals. This tower mount unit can be used as either a splitter or combiner to aggregate multiple bands on a common feeder line. The fully weatherproof tower mount unit incorporates a unique intelligent Bias-T architecture which passes the DC and AISG carrier frequency from any of the input ports to the common port while blocking the DC and AISG signals from being re-injected into the other input ports. The unit has internal lightning strike protection using a multi-stage surge protection circuit. |
Electrical Specification
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | Common | 555 - 960 | 18 dB minimum, 20 dB typical |
1850 - 1995 | 18 dB minimum, 20 dB typical | ||
1695 - 1780 | 18 dB minimum, 20 dB typical | ||
2110 - 2200 | 18 dB minimum, 20 dB typical | ||
2305 - 2690 | 18 dB minimum, 20 dB typical | ||
Low Band | 555 - 960 | 18 dB minimum, 20 dB typical | |
PCS | 1850 - 1995 | 18 dB minimum, 20 dB typical | |
AWS | 1695 - 1780 | 18 dB minimum, 20 dB typical | |
2110 - 2200 | 18 dB minimum, 20 dB typical | ||
WCS/BRS | 2305 - 2690 | 18 dB minimum, 20 dB typical | |
Insertion Loss | COM to Low Band | 555 - 960 | 0.1 dB maximum |
COM to PCS | 1850 - 1995 | 0.25 dB typical, 0.35 dB maximum | |
COM to AWS | 1695 - 1780 | 0.25 dB typical, 0.35 dB maximum | |
2110 - 2200 | 0.20 dB typical, 0.35 dB maximum | ||
COM to WCS/BRS | 2305 - 2690 | 0.25 dB typical, 0.35 dB maximum | |
Rejection | COM to Low Band | 1850 - 1995 | 50 dB minimum |
1695 - 1780 | 50 dB minimum | ||
2110 - 2200 | 50 dB minimum | ||
2305 - 2690 | 50 dB minimum | ||
COM to PCS | 555 - 960 | 50 dB minimum | |
1695 - 1780 | 50 dB minimum | ||
2110 - 2200 | 50 dB minimum | ||
2305 - 2690 | 50 dB minimum | ||
COM to AWS | 555 - 960 | 50 dB minimum | |
1850 - 1995 | 50 dB minimum | ||
2305 - 2690 | 50 dB minimum | ||
COM to WCS/BRS | 555 - 960 | 50 dB minimum | |
1850 - 1995 | 50 dB minimum | ||
1695 - 1780 | 50 dB minimum | ||
2110 - 2180 | 50 dB minimum | ||
2180 - 2200 | 45 dB minimum |
General Characteristics | |
Impedance | 50 ohms |
Continuous Average Power | 60 W maximum per input port |
Peak Envelope Power | 1.2 kW maximum per input port, excluding WCS/BRS port which is 650 W |
Intermodulation Performance(all ports) | <-117 dBm (-160 dBc) typical (2 × +43 dBm tones) all bands |
DC Pass Current/AISG Pass | 3A/AISG signal (2.176 Mhz) per AISG 2.0 |
Mechanical Specification
Model | Single | Twin |
Connectors | 5 × (4.3-10 or 7-16) female | 10 × (4.3-10 or 7-16) female |
Housing Dimensions | 10.0 × 10.2 × 1.7 in. (253.8 × 258.5 × 43.8 mm) |
10.5 × 10.2 × 3.5 in. (266.2 × 258.5 × 88.2 mm) |
Dimensions w/Bracket | 10.0 × 13.7 × 2.4 in. (253.8 × 347.6 × 59.8 mm) |
10.5 × 13.7 × 4.1 in. (266.2 × 347.6 × 104.3 mm) |
Weight | 12.8 lbs (5.8 kg) | 25.1lbs (11.4 kg) |
Frontal Wind Load | 223 N @150km/hour | 223 N @150km/hour |
Lateral Wind Load | 38.5 N @150km/hour | 77.5 N @150km/hour |
Outdoor Broadband Quadraplexer Outline Drawing |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
RET-CBK | AISG Cable Kit |
BT-0723-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0723-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0723-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Product Information
QPX-07081921 Broadband Quadraplexer outline drawing |
Parts & Accessories
QPO-69197236-x-S2 | Outdoor Quadplexer with 4.3-10 connectors |
QPO-69197236-x-T2 | Outdoor Twin Quadplexer with 4.3-10 connectors |
QPO-69197236-x-S1 | Outdoor Quadplexer with 7-16 connectors |
QPO-69197236-x-T1 | Outdoor Twin Quadplexer with 7-16 connectors |
Option (-x) | Description |
-S | Smart Bias-T, DC/AISG Pass through on either port |
-0 | No DC/AISG Pass through |
-1 | DC/AISG Pass through 555-960 Band to COMMON, DC Block on all other input ports |
-2 | DC/AISG Pass through PCS Band to COMMON, DC Block on all other input ports |
-3 | DC/AISG Pass through AWS to COMMON, DC Block on all other input ports |
-4 | DC/AISG Pass through WCS/BRS to COMMON, DC Block on all other input ports |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68 |
|