|
||||
Broadband Quadplexer Combiner | QPO-39182236-E-T2 | |||
|
Overview
The CCI Outdoor Broadband Quadplexer combines 390-960, 1710-1880, 1920-2170, and 2300-2700 bands onto a common port. Specifically intended for use in multi-band systems with limited feeder lines, this CCI Quadplexer facilitates the addition of new technologies including LTE and new spectrum onto existing sites, while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and the total cost to upgrade a site is significantly reduced. An optional twin unit with two Quadplexers mounted on a single bracket is also available. Technical Description: The Outdoor Broadband Quadplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the 700/800/900, 1800, 2100 and 2600 bands on a common feeder line. The fully weatherproof tower mount outdoor Quadplexer provides DC and AISG signal pass-through, enabling power and control for TMA's & RET antennas. The Quadplexer is available with DC/AISG including Smart DC with autosense. The Smart Bias-Tee architecture passes the DC and AISG carrier frequency from any one of the input ports to the common port while blocking the DC and AISG signals from being re-injected into the other input ports. The Quadplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit. |
Electrical Specification
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | 5 COMMON (COM) | 390 - 960 | 18 dB minimum, 20 dB typical |
1710 - 1880 | 18 dB minimum, 20 dB typical | ||
1920 - 2170 | 18 dB minimum, 20 dB typical | ||
2300 - 2700 | 18 dB minimum, 20 dB typical | ||
1 (390-960) | 390 - 960 | 18 dB minimum, 20 dB typical | |
2 (1710-1880) | 1710 - 1880 | 18 dB minimum, 20 dB typical | |
3 (1920-2170) | 1920 - 2170 | 18 dB minimum, 20 dB typical | |
4 (2300-2700) | 2300 - 2700 | 18 dB minimum, 20 dB typical | |
Insertion Loss | 5 to 1 (COM to 390-960) | 390 - 960 | 0.35 dB maximum, 0.25 dB typical |
5 to 2 (COM to 1710-1880) | 1710 - 1880 | 0.35 dB maximum, 0.25 dB typical | |
5 to 3 (COM to 1920-2170) | 1920 - 2170 | 0.35 dB maximum, 0.25 dB typical | |
5 to 4 (COM to 2300-2700) | 2300 - 2700 | 0.35 dB maximum, 0.25 dB typical | |
Isolation | 5 to 1 (COM to 390-960) | 1710 - 1880 | 50 dB minimum, 55 dB typical |
1920 - 2170 | 50 dB minimum, 55 dB typical | ||
2300 - 2700 | 50 dB minimum, 55 dB typical | ||
5 to 2 (COM to 1710-1880) | 390 - 960 | 50 dB minimum, 55 dB typical | |
1920 - 2170 | 50 dB minimum, 55 dB typical | ||
2300 - 2700 | 50 dB minimum, 55 dB typical | ||
5 to 3 (COM to 1920-2170) | 390 - 960 | 50 dB minimum, 55 dB typical | |
1710 - 2170 | 50 dB minimum, 55 dB typical | ||
2300 - 2700 | 50 dB minimum, 55 dB typical | ||
5 to 4 (COM to 2300-2700) | 390 - 960 | 50 dB minimum, 55 dB typical | |
1710 - 1880 | 50 dB minimum, 55 dB typical | ||
1920 - 2170 | 50 dB minimum, 55 dB typical | ||
Group Delay | COM to 390-960 | 390 - 960 | 7 ns maximum |
COM to 1710-1880 | 1710 - 1880 | 25 ns maximum | |
COM to 1920-2170 | 1920 - 2170 | 25 ns maximum | |
COM to 2300-2700 | 2300 - 2700 | 15 ns maximum | |
Group Delay Variation | COM to 390-960 | 390 - 960 | 4 ns maximum |
COM to 1710-1880 | 1710 - 1880 | 10 ns maximum | |
COM to 1920-2170 | 1920 - 2170 | 7 ns maximum | |
COM to 2300-2700 | 2300 - 2700 | 5 ns maximum |
General Characteristics | |||
Impedance | 50 ohms | ||
Continuous Average Power (RMS) | 200 W max. per input port simultaneous | ||
Peak Envelope Power | 2 kW max. | ||
Intermodulation Performance(all ports) | <-117 dBm (-160 dBc) typical (2 × +43 dBm tones) all bands |
DC/AISG | |||
DC Autosense | DC path is automatically determined, when the unit is used as a combiner or splitter. | ||
Combine mode priority | 1. 1710 - 1880 MHz 2. 2300 - 2700 MHz 3. 1920 - 2170 MHz 4. 690 - 960 MHz |
||
DC Autosense Combine Mode Operation | The port with DC voltage (7 to 30 V) is automatically passed to the common port. If more than one port has DC voltage present, the port with the highest priority is passed. If a short cicuit is detected on the Common Port DC/AISG is disabled for the entire unit. | ||
DC Autosense Splitter Mode Operation | DC/AISG pass through will be disabled for ports where a short circuit is detected and DC/AISG wll be passed to all other ports. | ||
DC Bypass Power-Up to Operationg Time | <100 ms | ||
Current Consumption @TBD VDC | 35 mA typical, 50 mA maximum (7..0 to 30 VDC) | ||
Current (Single Path) | 2.5 A maximum | ||
Current Common | 2.5 A maximum | ||
AISG Signal | 2.176 Mhz, per AISG 2.0 |
Mechanical Specification
Model | Single (4 In, 2 Out) | Twin (8 In, 2 Out) |
Ports, in-line | 4 × BTS, 1 × ANT | 8 × BTS, 2 × ANT |
Connectors | 5 × 4.3-10 female | 10 × 4.3-10 female |
Dimensions w/Bracket | 10.35 × 8.07 × 2.43 in. (263.0 × 205.0 × 61.7 mm) |
10.35 × 8.03 × 4.48 in. (263.0 × 204.0 × 113.7 mm) |
Housing Dimensions | 6.57 x 7.95 × 1.84 in. (167.0 x 202.0 × 46.7 mm) - per Quadplexer | |
Weight | 6.6 lbs (3.0 kg) | 13.2 lbs (6.0 kg) |
Housing Ground Lug | 1 × M8 | 1 × M8 |
Finish | Housing - Powder Coat Gray; Bracket(s) - 304 Stainless Steel (Passivated per ASTM A-967) |
|
Packaging Size | TBD | 17.91 x 12.4 x 15.35 in. (455 x 315 x 390 mm) for 4 pcs. |
Packaging Weight | TBD | 60.5 Lbs. (27.5 kg) for 4 pcs. |
Allowable Mast Diameter | 3 to 6 inches (76.2 to 152.4 mm) | |
Pole Mounting | Use integral mounting bracket and the 2 band clamps provided. (Orientation, the connectors will be in-line with mast) |
|
Wall Mounting | Use integral mounting bracket and appropriate fasteners. (Orientation, no restrictions) |
Outdoor Broadband Quadraplexer Outline Drawing |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
RET-CBK | AISG Cable Kit |
BT-0821-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0821-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0821-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Product Information
QPO-39182247 Broadband Quadplexer Dimension Drawing |
Parts & Accessories
QPO-39182236-E-S2 | Single 390-960/1710-1880/1920-2170/2400-2700 Quadplexer with 4.3-10 connectors and Smart DC for DC/AISG pass through in either direction on any port |
QPO-39182236-E-T2 | Twin 390-960/1710-1880/1920-2170/2400-2700 Quadplexer with 4.3-10 connectors and Smart DC for DC/AISG pass through in either direction on any port |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68 |
|