|
||||
800/850 Band Combiner | PFC-885-602 | |||
|
Overview
CCI’s Low Loss 800 Band and 850 Band Combiner combines two Base Station outputs onto a single feeder without the insertion loss normally associated with hybrid combiners. The unit is fully passive and delivers a matched low insertion loss solution for the sharing of common feeder lines and antennas. The unit requires no power and has a DC Block on the Input ports. The unit is housed in a weatherproof outdoor enclosure suitable for tower mount application. Technical Description: Internal duplexers deliver signal to independent Tx and Rx filter combiners, enabling a high level of control and performance to maintain good isolation while minimizing insertion loss. Stages are kept to a minimum to maximize power and efficiency. Transmit paths are fully isolated from Receive paths to prevent intermodulation products. The tower mount unit consists of multiple band-pass filters which are housed in an IP67 moisture proof enclosure, and 4.3-10 connectors suited for long-life masthead mounting. The unit provides protection against lightning strikes via a multi-stage surge protection circuit. |
Electrical
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | COM | 791.0 - 801.0 | 18 dB minimum, 20 dB typical |
832.0 - 842.0 | 18 dB minimum, 20 dB typical | ||
811.0 - 821.0 | 18 dB minimum, 20 dB typical | ||
852.0 - 862.0 | 18 dB minimum, 20 dB typical | ||
PORT 1 | 791.0 - 801.0 | 18 dB minimum, 20 dB typical | |
832.0 - 842.0 | 18 dB minimum, 20 dB typical | ||
PORT 2 | 811.0 - 821.0 | 18 dB minimum, 20 dB typical | |
852.0 - 862.0 | 18 dB minimum, 20 dB typical | ||
Insertion Loss | PORT 1 to COM | 791.0 - 801.0 | 0.5 dB typ. 0.6 dB max. |
832.0 - 842.0 | 0.5 dB typ. 0.6 dB max. | ||
PORT 2 to COM | 811.0 - 821.0 | 0.5 dB typ. 0.6 dB max. | |
852.0 - 862.0 | 0.5 dB typ. 0.6 dB max.. | ||
Isolation | PORT 1 to PORT 2 | 791.0 - 801.0 | 30 dB minimum |
832.0 - 842.0 | 30 dB minimum | ||
811.0 - 821.0 | 30 dB minimum | ||
852.0 - 862.0 | 30 dB minimum |
General Characteristics | |
Impedance | 50 ohms |
Continuous Average Power | 200 W max. (all ports) |
Peak Envelope Power | 2 kW max. (all ports) |
Intermodulation Performance (at COM port in RX band) | <-112 dBm (-155 dBc) typical (2 × +43 dBm tones) all bands |
DC Pass Current/AISG Pass (Port 2 to COM) | 3A/AISG signal (2.176 MHz) per AISG 2.0 |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
SCU-AISG2-P | AISG 2.0 Portable Site Controller |
RET-CBK | AISG Cable Kit |
BT-0723-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0723-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0723-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68 |
|