|
||||
Broadband Outdoor Diplexer | DPO-6196-xxx | |||
|
Overview
The CCI Outdoor Broadband Diplexer passes 614-1880 MHz on its low band input port, and 1920-2690 MHz on its high band input port. The Diplexer combines the low band and high band signals on to a common port and is specifically intended for use in multi-band systems with limited feeder lines. The Diplexer facilitates the addition of new technologies including LTE and new spectrum to existing sites while providing a high degree of isolation between systems. Decreasing the number of feeder lines lowers tower loading, leasing and installation expenditures and significantly reduces the total cost to upgrade a site. Technical Description: The CCI Outdoor Broadband Diplexer consists of multiple filters and can be used as either a splitter or combiner to aggregate the 614-1880 MHz band, with the 1920-2690 MHz band on to a common feeder line. The fully weatherproof tower mount outdoor Diplexer can optionally provide DC and AISG signal pass-through on either of the band specific ports, enabling power and control for TMA's & RET antennas. The Smart Bias-T architecture passes the DC and AISG carrier frequency from any one of the input ports to the common port while blocking the DC and AISG signals from being re-injected into the other input ports. The Diplexer has internal multi-strike lightning protection using a multi-stage surge protection circuit. |
Electrical Specification
RF Parameters | Ports | Frequency(MHz) | Specification |
Return Loss | COMMON | 614 - 960 | 18 dB minimum, 20 dB typical |
1710 - 1880 | 18 dB minimum, 20 dB typical | ||
1920 - 2690 | 18 dB minimum, 20 dB typical | ||
Lowband Port | 614 - 960 | 18 dB minimum, 20 dB typical | |
1710 - 1880 | 18 dB minimum, 20 dB typical | ||
Highband Port | 1920 - 2690 | 18 dB minimum, 20 dB typical | |
Insertion Loss | COMMON to Lowband Port |
614 - 960 | 0.2 dB maximum |
1710 - 1785 | 0.3 dB maximum | ||
1805 - 1880 | 0.6 dB maximum | ||
COMMON to Highband Port |
1920 - 1980 | 0.5 dB maximum | |
2110 - 2170 | 0.3 dB maximum | ||
2500 - 2690 | 0.2 dB maximum | ||
Isolation | Highband Port to Lowband Port |
1920 - 2690 | 50 dB minimum |
Lowband Port to Highband Port |
614 - 960 | 50 dB minimum | |
1710 - 1880 | 50 dB minimum |
General Characteristics | |
Impedance | 50 ohms |
Continuous Average Power | 250 W maximum all ports |
Peak Envelope Power | 2.5 kW maximum all ports |
DC Pass Current/AISG Pass | 3.0A/AISG signal (2.176 MHz) per AISG 2.0 |
Intermodulation | <-117 dBm (-160 dBc) minimum, all bands at 2× +43 dBm tones |
Mechanical
Model | Single | Twin |
Connectors | 3 x 4.3-10 female | 6 x 4.3-10 female |
Dimensions w/Bracket (HxWxD) | 6.42 x 8.90 x 2.43 in. (163 x 226 x 61.7 mm) |
6.42 x 8.90 x 4.48 in. (163 x 226 x 113.7 mm) |
Housing Dimensions (HxWxD) | 6.42 x 5.20 x 1.84 in. (163 x 132 x 46.7 mm) |
6.42 x 5.20 x 3.89 in. (163 x 132 x 98.7 mm) |
Weight | 3.75 lbs (1.7 kg) | 7.7 lbs. (3.5 kg) |
Mounting | Pole/Wall mounting bracket |
Outdoor Diplexer Outline Drawing |
Accessories
SCU-AISG2-3 | AISG 2.0 Site Controller |
RET-CBK | AISG Cable Kit |
BT-0821-DMDF-AG-O | DIN-Male RF Port, DIN-Female RF+DC+AISG Port |
BT-0821-DFDM-AG-O | DIN-Female RF Port, DIN-Male RF+DC+AISG Port |
BT-0821-DFDF-AG-O | DIN-Female RF Port, DIN-Female RF+DC+AISG Port |
Parts & Accessories
DPO-6196-0-S2 | Outdoor Broadband Diplexer with no DC/AISG pass-through and 4.3-10 connectors |
DPO-6196-S-S2 | Outdoor Broadband Diplexer with Smart Bias-T and 4.3-10 connectors |
DPO-6196-0-T2 | Outdoor Twin Broadband Diplexer with no DC/AISG pass-through and 4.3-10 connectors |
DPO-6196-S-T2 | Outdoor Twin Broadband Diplexer with Smart Bias-T and 4.3-10 connectors |
Standards & Compliance
Safety | EN 60950-1, UL 60950-1 |
Emission | EN 55022 |
Immunity | EN 55024 |
Environmental | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, IEC61000-4-5, GR-63-CORE 4.3.1, EN 60529 IP67, IP68 |
|