• High power low PIM attenuator at 100W across a wideband from 698 to 2700 MHz
• Excellent return loss performance
• Wide range of attenuation values from 6 to 20 dB

• High power low PIM attenuator at 100W across a wideband from 680 to 3800 MHz
• Excellent return loss performance
• Wide range of attenuation values from 3 to 30 dB

CCI’s Pico-Cell Booster Amplifier improves the performance of low-power Micro Base Stations (BTS) allowing for cost efficient implementation of high capacity radio networks

CCI’s 700 MHz DAS Interface Modules provide an integrated, convenient, and single connection point when using single or multiple LTE base stations with a common DAS system.

CCI’s 700 MHz DAS Interface Modules provide an integrated, convenient, and single connection point when using single or multiple LTE base stations with a common DAS system.

CCI’s AWS DAS Interface Module provides an integrated, convenient, and single connection point when using single or multiple AWS base stations with a common DAS system.

CCI’s ECHO Repeater Monitoring System (ERMS) monitors both SIRIUS and XM Terrestrial signals.  The ERMS triggers alarms based on pre-set performance levels. It records alarm events in memory and it has upgradeable firmware.

Low Power 2 x Channel Repeater for GSM 1800 (1710-1880 MHz)

2 x Channel Selective Repeater for GSM 1800 (1710-1880 MHz)

Low Power 4 x Channel Repeater for GSM 1800 (1710-1880 MHz)

4 x Channel Selective Repeater for GSM 1800 (1710-1880 MHz)

Low Power 6 x Channel Repeater for GSM 1800 (1710-1880 MHz)

6 x Channel Selective Repeater for GSM 1800 (1710-1880 MHz)

Low Power Band Selective Repeater for GSM 1800 (1710-1880 MHz)

Band Selective Repeater for GSM 1800 (1710-1880 MHz)

Low Power 2 x Channel Repeater for GSM 900 (890-960 MHz)

2 x Channel Selective Repeater for GSM 900 (890-960 MHz)

Low Power 4 x Channel Repeater for GSM 900 (890-960 MHz)

4 x Channel Selective Repeater for GSM 900 (890-960 MHz)

Low Power 6 x Channel Repeater for GSM 900 (890-960 MHz)

6 x Channel Selective Repeater for GSM 900 (890-960 MHz)

Low Power Band Selective Repeater for GSM 900 (890-960 MHz)

Band Selective Repeater for GSM 900 (890-960 MHz)

Low Power Band Selective Repeater for LTE 800 (791-862 MHz)

Band Selective Repeater for LTE 800 (791-862 MHz)

CCI’s 200W Wideband 2-Way Hybrid Combiner with Load provides an Outdoor solution where combining of multiple basestation outputs into one output is required.

CCI’s 200W Wideband 2-Way Hybrid Combiner with Load provides an Outdoor solution where combining of multiple basestation outputs into one output is required.

CCI’s 150W Wideband 2-Way Hybrid Combiner with Load provides an Outdoor solution where combining of multiple basestation outputs into one output is required.

CCI’s Outdoor PCS 2-Way Hybrid Combiner with integrated Load provides an Outdoor solution where combining of multiple basestation outputs onto a common output is required.

CCI’s 200W Wideband 2-Way Hybrid Combiner provides an Outdoor solution where combining of multiple basestation outputs into one or two common outputs is required.

CCI’s High Power 4x4 Hybrid Combiner is commonly used to combine multiple Base Station (BTS) resources into a Distributed Antenna System (DAS). The RF from each input port is present equally at each one of the four output ports of the 4x4 Hybrid.

One foot (0.3 m), single port, single pol antenna with a 65° azimuth beamwidth downtilted 45°, covering 698-2700 MHz for indoor sites.

• High power 100W low PIM load  supports a wideband from 694 to 2700 MHz
• Excellent return loss performance
• Available with 7-16 DIN, and 4.3-10 Connectors

• High power 100W low PIM load supports an Ultra-wideband from 600 to 6000 MHz
• Excellent return loss performance
• Available withMale or Female 7-16 DIN, 4.3-10 or N-type Connectors

• High power 200W low PIM load  supports an Ultra-wideband from 600 to 6000 MHz
• Excellent return loss performance
• Available withMale or Female 7-16 DIN, 4.3-10 or N-type Connectors

• High power 100W low PIM load  supports an Ultra-wideband from 680 to 3800 MHz
• Excellent return loss performance
• Available withMale or Female 7-16 DIN, 4.3-10 or N-type Connectors

• High power 200W low PIM load  supports an Ultra-wideband from 680 to 3800 MHz
• Excellent return loss performance
• Available withMale or Female 7-16 DIN, 4.3-10 or N-type Connectors

• Low Power 5W low PIM load  supports a wideband from DC to 3700 MHz
• Excellent return loss performance
• Available with 7-16 DIN, and 4.3-10 Connectors

• High power 100W low PIM load supports an Broadband from DC to 4200 MHz
• Excellent return loss performance
• Available withMale or Female 7-16 DIN, 4.3-10 or N-type Connectors

• High power 600W low PIM load supports an Broadband from DC to 4200 MHz
• Excellent return loss performance
• Available with Male or Female 7-16 DIN, 4.3-10 or N-type Connectors

Two foot (0.6 m), multiband, four port antenna with a true 30°x30° beamwidth, covering 694-960 MHz and 1695-2690 MHz frequencies.

Two foot (0.6 m), multiband, two port antenna with a true 30°x30° beamwidth, covering 698-960 MHz / 1695-2690 MHz frequencies.

One foot (0.3 m), multiband, four port antenna with a 65° azimuth beamwidth, covering 694-960 MHz and 1695-2690 MHz frequencies.

• High power, wideband power divider at 500W from 698 to 2700 MHz
• Low RF Insertion Loss and excellent return loss performance
• Available in 2-way, 3-way and 4-way

• High power, wideband, low PIM power divider at 750W from 555 to 3800 MHz
• Low RF Insertion Loss and excellent return loss performance
• Outdoor units available in 2-way, 3-way and 4-way

• High power, wideband, low PIM power divider at 300W from 614 to 6000 MHz
• Low RF Insertion Loss and excellent return loss performance
• Outdoor units available in 2-way, 3-way and 4-way

• High power, wideband, low PIM power divider at 300W from 614 to 2700 MHz
• Low RF Insertion Loss and excellent return loss performance
• Outdoor units available in 2-way, 3-way and 4-way

• High power, wideband, low PIM power divider at 100W from 698 to 3800 MHz
• Low RF Insertion Loss and excellent return loss performance
• Outdoor units available in 2-way, 3-way and 4-way

• High power, wideband, low PIM power divider at 200W from 380 to 3800 MHz
• Low RF Insertion Loss and excellent return loss performance
• Outdoor units available in 2-way, 3-way and 4-way

• Fully enclosed outdoor convection cooled Twin RRU Power Supply
• High power 1200 Watt 48VDC
• Performs at 88% typical efficiency while operating at 70% of rated load