CCI’s Outdoor PHS Notch Filter provides a very low insertion loss over 1710-1880 MHz and offers a minimum of 70 dB attentuation at frequencies of 1884.5 - 1915.85 MHz.

Communication Components, Inc. Broadband Pentaplexer Combiner combines 600/700, 850/900, PCS, AWS and WCS/2600 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Pentaplexer Combiner combines 617-960 MHz, PCS, AWS and 2 Inputs of WCS/BRS band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Broadband Pentaplexer Combiner combines 600/700, 850/900, PCS, AWS and WCS/2600 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Rackmount Broadband Pentaplexer Combiner combines 617-960 MHz, PCS, AWS and 2 Inputs of WCS/BRS band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Pentaplexer Combiner combines 617-960 MHz, PCS, AWS and 2 Inputs of WCS/BRS band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Broadband Pentaplexer Combiner combines 700, SMR/850, PCS, AWS and WCS/2600 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Broadband Pentaplexer Combiner combines 700, SMR/850, PCS, AWS and WCS/2600 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Broadband Pentaplexer Combiner combines 700/800, 900, 1800, 2100 and 2300/2600 band Basestation Tx/Rx signals onto a common port.

CCI’s Dual Technology Antenna Sharing Combiner (ASC) allows two Base Stations to share the same antennas and preserves Receive Diversity without any combining losses.

CCI’s PCS Band Multi-Technology Antenna Sharing Combiner (ASC) allows two PCS Band Base Stations to share the same antennas and preserves receive diversity without any combining losses.

CCI’s AWS Band Multi-Technology Antenna Sharing Combiner (ASC) allows two AWS band base stations to share the same antennas and preserves receive diversity without any combining losses.

CCI’s Dual Technology Antenna Sharing Combiner (ASC) allows two Base Stations to share the same antennas and preserves Receive Diversity without any combining losses.

CCI’s Dual Technology Antenna Sharing Combiner (ASC) allows two Base Stations to share the same antennas and preserves Receive Diversity without any combining losses.

CCI’s Indoor 850 MHz Dual Bandpass Filter allows a 8 MHz pass band in both TX while providing 60 dB of rejection at 881-915 MHz.

CCI’s Outdoor 850 MHz Twin and Quad Bandpass Filter allows a 65 MHz pass band of 814-879 MHz with very low insertion loss 0.3 dB typical and 3.0 dB max at the band edge and offers a minimum of 30 dB attentuation at frequencies ≥ 880.1 MHz.

CCI’s Indoor 700 MHz Dual Bandpass Filter allows a 45 MHz pass band in the RX band while providing 20 dB of rejection within 10 MHz of the passband.

CCI’s Indoor 850 MHz Dual Bandpass Filter allows a 36 MHz pass band in the RX band while providing 20 dB of rejection within 9 MHz of the passband.

CCI’s Indoor 850 MHz Dual Bandpass Filter allows a 35 MHz pass band in the RX band while providing 20 dB of rejection within 20 MHz of the passband.

CCI’s Indoor 800 MHz Dual Bandpass Filter allows a 30 MHz pass band in the RX band while providing 20 dB of rejection within 10 MHz of the passband.

CCI’s Indoor 900 MHz Dual Bandpass Filter allows a 35 MHz pass band in the RX band while providing 20 dB of rejection within 10 MHz of the passband.

CCI’s Indoor 1800 MHz Dual Bandpass Filter allows a 75 MHz pass band in the RX band while providing 20 dB of rejection within 20 MHz of the passband.

CCI’s Indoor 1900 MHz Dual Bandpass Filter allows a 60 MHz pass band in the RX band while providing 20 dB of rejection within 22 MHz of the passband.

CCI’s Indoor 2100 MHz Dual Bandpass Filter allows a 60 MHz pass band in the RX band while providing 20 dB of rejection within 15 MHz of the passband.

CCI’s Indoor 2600 MHz Dual Bandpass Filter allows a 70 MHz pass band in the RX band while providing 20 dB of rejection within 50 MHz of the passband.

Communication Components, Inc. (CCI) Bias-T’s are designed to combine the DC Bias and AISG compliant communication link provided by the “Site Control Unit” (SCU) with the RF signal from other equipment onto the center conductor of the feeder line.

Communication Components, Inc. (CCI) Bias-T’s are designed to combine the DC Bias provided by a Power Distribution Unit for TMA’s (PDU) or other DC Voltage source and the RF signal from other equipment onto the center conductor of a feeder line.

Communication Components, Inc. (CCI) Bias-T’s are designed to combine the DC Bias and AISG compliant communication link provided by the “Site Control Unit” (SCU) with the RF signal from other equipment onto the center conductor of the feeder line.

CCI’s “Small Outdoor (6U) RX-AIT Hanging Cabinet” is available for use in CCI RX-AIT UMTS Cositing Systems.

CCI’s 20W SDAR Directional Coupler/Detector is used in the SDAR Terrestrial 20W Repeater System.

Communication Components, Inc. Dual Diplexer combines 850 and 1900 band basestations onto a single feeder.

CCI’s Dual Duplexer combines Tx and Rx paths onto a common feeder.

CCI’s Dual Duplexer combines Tx and Rx paths onto a common feeder.

CCI’s SDAR Terrestrial Diplexer Filter Netwwork combines Sirius and XM  SDAR sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s Outdoor Diplexer combines “LTE700” band with “Cellular” band base stations onto a common feeder line.

• Combines two frequency ranges 696-960 MHz with 1710-2700 MHz onto a single common port.
• The low band port covers 700, 850 and 900 bands and the high band port covers 1800, PCS, AWS and the BRS(EBS) bands.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

• Combines low band frequencies 694-960 MHz with high band 1695-2180 MHz onto a single common port. 
• Supports 700, 850 and 900 MHz bands on the low band port and DCS, PCS and AWS bands on the high band port
• High power 500 W with low insertion loss in a small, lightweight enclosure

Communication Components, Inc. Outdoor Combiner/Diplexer combines AWS and PCS band Basestation Tx/Rx onto a common feeder line.

Communication Components, Inc. Outdoor Combiner/Diplexer combines AWS and PCS band Basestation Tx/Rx onto a common feeder line.

• Combines the frequencies covering AWS-PCS (1695-2155 MHz) with WCS-BRS (2300-2690 MHz)
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines two frequency ranges 380-960 MHz with 1695-2200 MHz onto a single common port.
• The low band port covers 600, 700, 850 and 900 bands and the high band port covers 1800, PCS, 2100 and AWS bands.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

• Combines two frequency ranges DC-490 MHz with 694-3800 MHz onto a single common port.
• The low band port covers the VHF bands covering DC-490MHz and the high band port covers the 694-960/1700-2700/3300-3800 MHz bands.
• High power 300 W per port with low insertion loss in a small, lightweight enclosure

Communication Components, Inc. Outdoor Broadband Diplexer combines 600 MHz band and 700 low band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Diplexer combines 700 MHz band and 800/900 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Diplexer combines 700 MHz band and 800/900 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Diplexer combines 800 MHz band and 900 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Diplexer combines 800 MHz band and 900 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Diplexer combines 800 MHz band and 900 band Basestation Tx/Rx signals onto a common port.

• Combines the frequencies covering the 1800 MHz band (1710-1880 MHz) with the 2100 MHz band (1920-2170 MHz)
• High power 300 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the frequencies covering the 1800 MHz band (1710-1880 MHz) with the 2100 MHz band (1920-2170 MHz)
• High power 250 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

Communication Components, Inc. Outdoor Combiner/Diplexer combines AWS and PCS band Basestation Tx/Rx onto a common feeder line.

• Combines the frequencies covering PCS (1850-1995 MHz) with AWS/WCS (1695-1780/2110-2360 MHz)
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the frequencies covering PCS (1850-1990 MHz) with AWS/WCS (1695-1780/2110-2360 MHz)
• Low power 250 W per port with low insertion loss in a small, lightweight enclosure configured with 4.3-10 connectors
• Low intermodulation with isolation of >35 dB port to port

• Combines the frequencies covering PCS (1850-1990 MHz) with AWS/WCS (1695-1780/2110-2360 MHz)
• Low power 250 W per port with low insertion loss in a small, lightweight enclosure configured with 4.3-10 connectors
• Low intermodulation with isolation of >35 dB port to port

• Combines the frequencies covering PCS (1850-1990 MHz) with AWS/WCS (1695-1780/2110-2360 MHz)
• Low power 5 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >35 dB port to port

• Combines the frequencies covering PCS (1850-1990 MHz) with AWS/WCS (1695-1780/2110-2360 MHz)
• Low power 75 W per port with low insertion loss in a small, lightweight enclosure configured with 2.2-5 connectors
• Low intermodulation with isolation of >35 dB port to port

• Combines the frequencies covering AWS-PCS (1695-2180 MHz) with WCS-BRS (2300-2690 MHz), including AWS-3
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

Communication Components, Inc. Outdoor Combiner/Diplexer combines WCS A & B blocks with SDARS SXM Terrestrial Reppeater band onto a common feeder line.

• Combines two frequency ranges 380-2180 MHz with 2300-2700 MHz onto a single common port.
• The low band port covers the 380-960 MHz frequency range and the high band port covers 2300-2700 MHz frequency range.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

• Combines two frequency ranges 380-2180 MHz with 2300-2700 MHz onto a single common port.
• The low band port covers the 380-960 MHz frequency range and the high band port covers 2300-2700 MHz frequency range.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

• Combines two frequency ranges 380-2180 MHz with 2400-2700 MHz onto a single common port.
• The low band port covers the 380-960 MHz frequency range and the high band port covers 2400-2700 MHz frequency range.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

• Combines two frequency ranges 3300-4200 MHz with 5150-5925 MHz onto a single common port.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

• Combines the frequencies covering the 2300 MHz band (2300-2400 MHz) with the 2600 band (2500-2700 MHz)
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >30 dB port to port

• Combines two frequency ranges 380-2690 MHz with 3300-5925 MHz onto a single common port.
• The broadband diplexer low band port covers the 380-2690MHz frequency range and the high band port covers the 3300-5925 frequency range.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

• Combines two frequency ranges 380-960 MHz with 1425-2690 MHz onto a single common port.
• The low band port covers the 600, 700, 850 and 900 bands covering 380-960MHz and the high band port covers 1400, 1800, 2100, AWS, PCS, WCS and BRS bands.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

• Combines two frequency ranges 614-1880 MHz with 1920-2690 MHz onto a single common port.
• The low band port covers the 614-1880 MHz frequency range and the high band port covers 1920-2690 MHz frequency range.
• High power 250 W per port with low insertion loss in a small, lightweight enclosure

Communication Components, Inc. Outdoor Broadband Diplexer combines 600/700 MHz band and 800/900 band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Diplexer combines 600/700 MHz band and 800/900 band Basestation Tx/Rx signals onto a common port. Features Smart DC providing DC/AISG pass through in both combine and split paths.

Communication Components, Inc. Outdoor Broadband Diplexer combines 600/700 MHz band and 800/900 band Basestation Tx/Rx signals onto a common port.

• Combines two frequency ranges 690-960 MHz with 1690-2700 MHz onto a single common port.
• The low band port covers the 690-960 MHz frequency range and the high band port covers 1690-2700 MHz frequency range.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

Communication Components, Inc. Outdoor Broadband Diplexer combines 600 MHz band and 700 low band Basestation Tx/Rx signals onto a common port.

• Combines the frequencies covering PCS/AWS (1695-2180 MHz) with BRS (2496-2690 MHz)
• High power 250 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the frequencies covering 1800 MHz and 2100 MHz (1710-2170 MHz) with 2600 MHz (2500-2700 MHz)
• High power 250 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the frequencies covering PCS/AWS (1695-2200 MHz) with BRS (2496-2690 MHz)
• High power 250 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the frequencies covering PCS/AWS (1695-2200 MHz) with BRS (2496-2690 MHz)
• High power 250 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines two frequency ranges 698-960 MHz with 1695-2690 MHz onto a single common port.
• The low band port covers 700, 850 and 900 bands and the high band port covers 1800, AWS, PCS, WCS and the BRS(EBS) bands.
• High power 200 W per port with low insertion loss in a small, lightweight enclosure

Communication Components, Inc. Outdoor Broadband Diplexer combines 700 MHz low band and FirstNet band Basestation Tx/Rx signals onto a common port.

CCI’s Double Duplexer combines Tx and Rx paths onto a common feeder.

CCI’s Double Duplexer combines Tx and Rx paths onto a common feeder.

Communication Components, Inc. Broadband Rackmount Hexplexer Combiner combines 385-862, 880-960, 1425-1880, 1920-2170, 2300-2690 and 3300-5925 band Basestation Tx/Rx signals onto a common port.

CCI’s Outdoor PCS 2-Way Hybrid Combiner with integrated Load provides an Outdoor solution where combining of multiple basestation outputs onto a common output is required.

CCI’s 200W Wideband 2-Way Hybrid Combiner with Coupler provides an Outdoor solution where combining of multiple basestation outputs into one or two common outputs is required.

CCI’s High Power 4x4 Hybrid Combiner is commonly used to combine multiple Base Station (BTS) resources into a Distributed Antenna System (DAS). The RF from each input port is present equally at each one of the four output ports of the 4x4 Hybrid.

CCI’s 200W Wideband 2-Way Hybrid Combiner with an output coupler provides an Outdoor solution where combining of multiple basestation outputs into one or two common outputs is required.

CCI’s High Power 4x4 Hybrid Combiner with output coupler is commonly used to combine multiple Base Station (BTS) resources into a Distributed Antenna System (DAS). The RF from each input port is present equally at each one of the four output ports of the 4x4 Hybrid.

CCI’s 300Wideband 2-Way Hybrid Combiner with Coupler provides an Outdoor solution where combining of multiple basestation outputs into one or two common outputs is required.

CCI’s 300W wideband 3-Way Hybrid Combiner covering 698-3800 MHz. the coupler provides an Outdoor solution where combining of multiple RF outputs into one, two or three common outputs is required.

CCI’s High Power 4x4 Hybrid Combiner is commonly used to combine multiple Base Station (BTS) resources into a Distributed Antenna System (DAS). The RF from each input port is present equally at each one of the four output ports of the 4x4 Hybrid.

CCI’s 200W Wideband 2-Way Hybrid Combiner provides an Outdoor solution where combining of multiple basestation outputs into one or two common outputs is required.

CCI’s High Power 4x4 Hybrid Combiner is commonly used to combine multiple Base Station (BTS) resources into a Distributed Antenna System (DAS). The RF from each input port is present equally at each one of the four output ports of the 4x4 Hybrid.

CCI’s PCS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE PCS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s 2100 MHz In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE 2100 MHz Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “0” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “10” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “15” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s AWS In-Band Low Loss Diplexer with a “5” MHz Guard Band  combines two UMTS or LTE AWS Base Station sub-band outputs band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s Remote Tunable Narrow Guard Band Filter-Combiner (LLC) combines multiple PCS Band signals onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Remote Tunable Narrow Guard Band (10 MHz) Filter-Combiner (LLC) combines two (2) contiguous UMTS Carriers, one (1) 10 MHz LTE Carrier or up to six (6) contiguous NB-CDMA Cariers with either GSM, NB-CDMA, UMTS or LTE Carrier(s) onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Remote Tunable Narrow Guard Band Filter-Combiner (LLC) combines multiple Cellular Band signals onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Remote Tunable Narrow Guard Band Filter-Combiner (LLC) combines Cellular Band signals onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Low Loss fully integrated Filter-Combiner combines two operators or two technologies (eg GSM and LTE) on sub-bands of the 1800 band onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Low Loss PCS In-Band Combiner combines two Base Station outputs on the A and D plus E thru G sub-bands of the PCS (1900 MHz) band onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s Low Loss PCS In-Band Combiner combines two of the PCS (1900 MHz) band Base Station outputs on the D, B & E sub-bands with the C2 & C3 sub-bands  onto a single feeder without the insertion loss normally associated with hybrid combiners.

CCI’s Twin Low Loss fully integrated Filter-Combiner combines two operators or two technologies (eg UMTS and LTE) on sub-bands of the UMTS2100 band onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Low Loss fully integrated Filter-Combiner combines two operators or two technologies (eg GSM and LTE) on sub-bands of the 800 band onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Low Loss fully integrated Filter-Combiner combines two operators or two technologies (eg CDMA and LTE) on sub-bands of the Cellular 850 MHz  band onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Low Loss 800 Band/850 Band Combiner combines two Base Station outputs on the 800 and 850 bands onto a single feeder without the insertion loss normally associated with hybrid combiners. 

CCI’s Low Loss 800 Band/850 Band Combiner combines two Base Station outputs on the 800 and 850 bands onto a single feeder without the insertion loss normally associated with hybrid combiners. 

CCI’s Low Loss 800 Band/850 Band Combiner combines two Base Station outputs on the 800 and 850 bands onto a single feeder without the insertion loss normally associated with hybrid combiners. 

CCI’s Low Loss fully integrated Filter-Combiner combines two operators or two technologies (eg GSM and LTE) on sub-bands of the 900 band onto a single feeder without the insertion loss normally associated with passive combiners.

CCI’s Low Loss fully integrated Filter-Combiner combines two operators or two technologies (eg GSM and LTE) on sub-bands of the 900 band onto a single feeder without the insertion loss normally associated with passive combiners.

• Combines the 700/800 bands (698-862 MHz), 900 bands (880-960 MHz), 1800 (1710-1880 MHz) and the IMT/IMT-E bands (1920-2690 MHz)
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

Communication Components, Inc. Outdoor Broadband Quadplexer Combiner combines 1800, IMT 2100, 2300-2400 and 2500-2700 band Basestations Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Quadplexer Combiner combines PCS, AWS, WCS/2600 and 3300-5925 MHz Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Quadplexer Combiner combines PCS, AWS and 2 Inputs of WCS/BRS band Basestation Tx/Rx signals onto a common port.

• Combines the 390-960 MHz, 1710-1880 MHz, 1920-2170 MHz and the 2300-2700 MHz bands
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the 380-960 MHz, 1710-1880 MHz, 1920-2170 MHz and the 2300-2700 MHz bands
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the 600/700 bands (617-798 MHz), 850/900 bands (824-960 MHz), PCS (1850-1995 MHz) and the AWS/WCS bands (1695-1780/2110-2360 MHz)
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

Communication Components, Inc. Outdoor Broadband Quadplexer Combiner combines 555-960 MHz, PCS, AWS and WCS/BRS band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Indoor Rackmount Broadband Quadplexer Combiner combines PCS, AWS and 2 Inputs of WCS/BRS band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Rackmount Broadband Quadplexer Combiner combines 555-960 MHz, PCS, AWS and WCS/BRS band Basestation Tx/Rx signals onto a common port.

Communication Components, Inc. Outdoor Broadband Quadplexer Combiner combines 700 MHz, 850 MHz, PCS and AWS band Basestation Tx/Rx signals onto a common port.

CCI’s Receiver Air Interface Tray (RX-AIT) provides a convenient multiport connection for multiple basestations.

CCI’s Receiver Air Interface Tray (RX-AIT) provides a convenient multiport connection for multiple basestations.

Communication Components, Inc. Outdoor Broadband Triplexer combines 700/800 MHz, 900 MHz,  and DCS/IMT/IMT-E band Basestation Tx/Rx signals onto a common port.

• Combines DCS (1710-1880), UMTS2100 (1920-2110) and 2300/2600 Band (2300-2700)
• High power 60 W per port with low insertion loss
• Low intermodulation with isolation of >35 dB per band

• Combines DCS (1710-1880), UMTS2100 (1920-2110) and 2300/2600 Band (2300-2700)
• High power 200 W per port with low insertion loss
• Low intermodulation with isolation of >50 dB per band

• Combines DCS (1710-1880), UMTS2100 (1920-2110) and 2300/2600 Band (2300-2700)
• High power 200 W per port with low insertion loss
• Low intermodulation with isolation of >50 dB per band

• Combines PCS (1850-1995), AWS (1695-2200) and WCS/BRS (2305-2690), which includes AWS 1-3 extended
• High power 60 W per port with low insertion loss
• Low intermodulation with isolation of >50 dB per band

• Combines the 380-2690 MHz band with 3300-4200 MHz band and with the 5150-5925 MHz band
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the 390-960 MHz band with 1710-1880 MHz band and with the 1920-2170 MHz band
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the 380-960 MHz band with 1710-1880 MHz band and with the 1920-2690 MHz band
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines Low Band 380-960 MHz, Mid Band 1425-2690 MHz and High Band 3300-5925 MHz
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the 390-960 MHz band with 1695-2200 MHz band and with the 2300-2700 MHz band
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the 390-960 MHz band with 1695-2200 MHz band and with the 2300-2700 MHz band
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the 600/700 bands (617-798 MHz) with 850/900 bands (824-960 MHz) and with the 1400/PCS/AWS/WCS/BRS bands (1425-2690 MHz)
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

• Combines the 600/700/850/900 bands (617-960 MHz)with PCS (1850-1995 MHz) and with the AWS/WCS Bands (1695-1780/2110-2360 MHz)
• High power 200 W per port with low insertion loss in a small, lightweight enclosure
• Low intermodulation with isolation of >50 dB port to port

Communication Components, Inc. Outdoor Broadband Triplexer combines Basestation Tx/Rx signals from 555 - 960 MHz on the first port, 1695 - 2200 (PCS/AWS) on the second port, and 2305 - 2690 (WCS/BRS) band on the third port, onto a common port.

Communication Components, Inc. Outdoor Broadband Triplexer combines Basestation Tx/Rx signals from 555 - 960 MHz on the first port, 1695 - 2200 (PCS/AWS) on the second port, and 2305 - 2690 (WCS/BRS) band on the third port, onto a common port. Features Smart DC providing DC/AISG pass through in both combine and split paths.

• Combines DCS/IMT (1710-1880 & 1920-2170), S-Band (2300-2400) and IMT-E Band (2500-2690)
• High power 200 W per port with low insertion loss
• Low intermodulation with isolation of >50 dB per band

Communication Components, Inc. Outdoor Broadband Triplexer combines Base Station TX/RX signals from 694 to 960 MHz on the first port, AWS on the second port, and PCS band on the third port, onto a common port.

Communication Components, Inc. Outdoor Broadband Triplexer combines 700 Low, FirstNet, and 850 MHz band Basestation Tx/Rx signals onto a common port.

• Combines PCS (1850-1995), AWS (1695-2200) and WCS/BRS (2305-2690), which includes AWS 1-3 extended
• High power 60 W per port with low insertion loss
• Low intermodulation with isolation of >50 dB per band

• Combines PCS/AWS (1695-2200), WCS/BRS (2300-2700) and 3.5 (3300-5925) 
• High power 200 W per port with low insertion loss
• Low intermodulation with isolation of >50 dB per band

• Full 700, 850 MHz, and PCS/AWS bands, including AWS-3
• High power 200 W per port with low insertion loss
• AISG 2.0 compliant with smart Bias-T for any port DC/AISG pass through

Communication Components, Inc. Outdoor Broadband Triplexer combines Basestation Tx/Rx signals fromPCS Band, AWS Band and WCS/BRS band onto a common port.

• Combines PCS (1850-1995), AWS (1695-2180) and WCS/BRS (2310-2690), which includes AWS-3
• High power 60 W per port with low insertion loss
• Low intermodulation with isolation of >50 dB per band

Communication Components, Inc. Outdoor Broadband Triplexer combines Basestation Tx/Rx signals from 700/850/SMR on the first port, PCS/AWS on the second port, and 2500/2600 band on the third port, onto a common port.

CCI’s Universal DAS Tray is a universal mounting platform for all CCI DAS Interface “Modules”.