Multi-Port Antennas

CCI Portal Login

CCI Customer Portal

In the Americas
   
 
 
 
Sales  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Customer Service  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
Technical Support  
 
 
+1 (201) 342-3338 phone  
+1 (201)-342-3339 fax  
 
89 Leuning Street  
South Hackensack, NJ 07606  
USA  
 
 
      Two Port High-Band Antenna 2PA65R-E5A
                
       
       
 
  PI 2PA65RE5AA front PI 2PA65RE5AA back  
  • Five foot (1.5 m), WideBand, two port antenna with a 65° azimuth beamwidth covering 1695-2690 MHz frequencies
  • Two wide high band ports covering 1695-2690 MHz, with full spectrum compliance
  • Narrow enclosure with 10.1” (257 mm) width, reducing tower loading issues
  • LTE Optimized FBR and SPR performance, providing for an efficient use of valuable radio capacity
  • LTE Optimized Boresight and Sector XPD and USL performance, essential for LTE Performance
  • Exceeds minimum PIM performance requirements
  • 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
  • Equipped with 1 field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) controller

Overview

 

The CCI WideBand Antenna is a two port antenna, with two wide high band ports covering 1695-2690 MHz. The CCI WideBand Antenna provides the capability to deploy 2×2 Multiple-input Multiple-output (MIMO). The CCI WideBand antenna single RET configuration tilts both ports together, allowing for electrical downtilt uniformity across both ports.

CCI antennas are designed and produced to ISO 9001 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

 
  • 2×2 MIMO for the high band
  • Ready for Network Standardization on 4.3-10 DIN connectors
  • With CCI’s WideBand Antennas, wireless providers can connect platforms to a single antenna, reducing tower load, lease expense, deployment time and installation costs

Electrical

Ports 2 × High Band Ports for 1695-2690 MHz
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz 2496-2690 MHz
Gain 17.3 dBi 17.5 dBi 18.3 dBi 18.0 dBi 17.9 dBi
Azimuth Beamwidth (-3dB) 69° 68° 67° 65° 64°
Elevation Beamwidth (-3dB) 6.5° 5.9° 5.4° 4.5° 4.4°
Electrical Downtilt 0° to 10° 0° to 10° 0° to 10° 0° to 10° 0° to 10°
Elevation Sidelobes (1st Upper) < -16 dB < -17 dB < -17 dB < -16 dB < -18 dB
Front-to-Back Ratio @180° > 35  dB > 35 dB > 35 dB > 35 dB > 35 dB
Cross-Polar Discrimination (at Peak) > 21 dB > 20 dB > 22 dB > 25 dB > 22 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2×20W) ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc ≤ -153 dBc
Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts 300 watts
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground

BASTA Electrical Specifications  
Frequency Range 1695-1880 MHz 1850-1990 MHz 1920-2180 MHz 2300-2400 MHz 2496-2690 MHz
Gain over all Tilts (dBi) 16.8 17.1 17.5 17.6 17.1
Gain over all Tilts Tolerance (dB) 0.3 0.4 0.5 0.3 0.7
Gain at Low-Tilt (dBi) 16.7 16.9 17.3 17.5 17.2
Gain at Mid-Tilt (dBi) 16.9 17.3 17.7 17.8 17.2
Gain at High-Tilt (dBi) 16.9 17.2 17.4 17.6 16.7
Azimuth Beamwidth Tolerance (°) 2.1 2.1 2.0 1.7 3.1
Elevation Beamwidth Tolerance (°) 0.4 0.3 0.6 0.2 0.2
Electrical Downtilt Deviation (°) 0.7 0.6 0.6 0.7 0.8
First Upper Sidelobe Suppression (dB) 14.5 15.5 14.7 13.0 18.8
Upper Sidelobe Suppression Peak to 20° (dB) 14.4 15.4 14.5 13.0 16.1
Front-to-Back Ratio over ±20° (dB) 32.8 32.5 32.4 33.9 33.2
Cross-polar Discrimination at ±60° (dB) 11.2 8.2 7.7 8.0 8.2

Mechanical

Dimensions (L×W×D) 58.2×10.1×4.2 in (1479×257×106 mm)
Survival Wind Speed > 150 mph (> 241 kph)
Front Wind Load 141 lbs (626 N) @ 100 mph (161 kph)
Side Wind Load 70 lbs (312 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 5.5 ft2 (0.5 m2)
Weight * 25.4 lbs (11.5 kg)
Connector 2 × 4.3-10 female
Mounting Pole 2 to 5 in (5 to 12 cm)
* Weight excludes mounting
Bottom View  
   PI 2PA65RE5AA bottom

Connector Spacing  
   PI 2PA65RE5AA Connector Spacing

RET to Element Configuration  
  PI 2PA65RE5AA RET Element

Typical Antenna Patterns

  For detailed information on additional antenna patterns, contact customer support at
  2PA65RE5A AP 1740 AZEL5 2PA65RE5A AP 2155 AZEL5
  1740 MHz Azimuth & Elevation 5° 2155 MHz Azimuth & Elevation 5°
  2PA65RE5A AP 2360 AZEL5 2PA65RE5A AP 2500 AZEL5
  2360 MHz Azimuth & Elevation 5° 2580 MHz Azimuth & Elevation 5°
Model BSA-RET400   Remote Electrical Tilt System (RET) 
MBK-02   Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
AISGC-M-F-10FT   10 Ft (3 m) Male/Female RRU to Antenna AISG cable
SCU-AISG2-P   Portable AISG 2.0 Site Control Unit

Software/Firmware

pdficon large Firmware Upgrade Instructions
 softwareicon Current Firmware

Parts & Accessories

2PA65R-E5AA-K Five foot (1.5 m) QuadPort antenna with 65° azimuth beamwidth, 4.3-10 female connectors, 1 factory installed BSA-RET400 RET actuators (Type 17 internal) and MBK-02 mounting brackets
MBK-02 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET400 Remote electrical tilt actuator
AISGC-M-F-xFT AISGC-M-F-10FT 10 Ft (3 m) Male/Female RRU to Antenna AISG cable

Standards & Compliance

Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001
 
ISO9001Logo RoHS CE logo AISGLogo 3GPPLogo
  Footer
              
     
     
       
 

CCILogoType

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax